Chapter 5. Programming; A Program For Output Of The Detected Temperature Value As A Bcd Value - LG GLOFA G3F - RD3A User Manual

Chapter 5. PROGRAMMING

Chapter 5. PROGRAMMING

5.1 A Program for Output of the Detected Temperature Value as a BCD Value

1) System Configuration
2) Initial Settings
(1) Specifying the used channel: channel 0
(2) Specifying the type of the RTD : Pt 100
3) Descriptions of the Program
The present A/D conversion value of the detected temperature value which is detected from the
temperature-measuring resistor Pt 100 is displayed on the BCD digital display by use of channel 0 of the
temperature-measuring resistor input module. The lamp turns on when the detected temperature value is
a negative number and turns off when it is a positive number.
The lamp turns on when
the detected temperature
value is negative
5 - 1