4.1. System operation - Rigging
Fly Array systems are equipped with integrated rigging system for versatile applications.
Rigging must be performed only by trained personnel following the established safety rules.
MAXIMUM WEIGHT RESTRICTIONS MUST BE FOLLOWED AT ALL TIMES!
MAKE SURE THE SUPPORT STRUCTURE IS CAPABLE OF HOLDING THE APPLIED WEIGHT
WHILE SUSPENDING THE SYSTEM!
Fly 6 system flying via flying adapter
Required accessories:
FL-01 (part No. 0200101101) - 1 pcs
FL-02 (part No. 0200101102) - 1 pcs
VA-0010 (part No. 0209000001) - 2 pcs
- Align FL-02 flying adapter with rests of FL-
01 bracket.
- Insert two VA-0010 Quick lock pins into the
sockets to fix the assembly.
- Release two locking pins on the Fly 6
integrated hardware.
- Insert the FL-01 + FL-02 assembly to find
supports on the Fly 6 hardware supports.
- Insert two locking pins to secure the
connection.
MAXIMUM OF THREE FLY 6 SYSTEMS ARE
ALLOWED FOR SUSPENSION WITH FL-02
ADAPTER.
Standard 5/8" shackle may be used to
suspend the entire system.
Attaching two Fly 6 systems
- On the upper Fly 6 system release quick lock
pins, pull the integrated link down, and secure
it with the quick lock pin.
- Position the lower Fly 6 cabinet so its
integrated link finds support in the upper
cabinet's hardware.
- Secure connection with a quick lock pins
7
Fly Array User Manual rev 0.1
Need help?
Do you have a question about the Fly 6 and is the answer not in the manual?
Questions and answers