INSTALLING OF THIS UNIT MUST BE PERFORMED ONLY BY QUALIFIED TRAINED PERSONNEL FOLLOWING APPLICABLE SAFETY RULES. DO NOT ALLOW INSTALLATION OF THIS UNIT IF INSTALLATION HARDWARE IS BROKEN, BENT, PARTS ARE MISSING OR IS OTHERWISE DAMAGED. Z Series User Manual rev 2.10...
EN 61000-4-5:2006 connected. EN 61000-4-6:2014 - Consult the dealer or an experienced radio/TV EN 61000-4-11:2004 EN 60065:2002 /A1:2006 /A11:2008 /A2:2010 /A12:2011 technician for help. Bila Tserkva, 21 June 2018 Boris Albin For comliance questions: info@mag-audio.com Z Series User Manual rev 2.10...
3. Z series 3.1 Introduction 3.2 Z series speaker models Z series is designed for budget small- and me- Z series includes following speaker models: dium-sized indoor spaces. Versatile and reliable loudspeakers with professional sound quality Z 320-4 part number 0023401111...
Steel grill, polymer Grill protective net protective net protective net protective net - peak value, calculated according to AES 2 - 2012 - based on transducer power measured according to AES 2 - 2012 Z Series User Manual rev 2.10...
Page 11
Plywood; wear- Plywood; wear- Enclosure material resistant paint resistant paint resistant paint resistant paint Steel grill, polymer Steel grill, polymer Steel grill, polymer Steel grill, polymer Grill protective net protective net protective net protective net Z Series User Manual rev 2.10...
5. System operation 5.1. Rigging Z series systems are equipped with M10 mounting point adapters and pole mount adapters systems for versatile applications. Rigging must be performed only by trained personnel following the established safety rules. MAXIMUM WEIGHT RESTRICTIONS MUST BE FOLLOWED AT ALL TIMES!
Required accessories: AZ320 (part No. MK008-0150-00) AZ350 (part No. MK008-0151-00) Fast and neat flying of the single Z series’ full-range cabinet using flying adapter. - Secure Z series’ cabinet onto the flying adapter using M10 bolts. - Mount the assembly using the standard 5/8 inch shackle.
Z series passive Z series passive full-range system full-range system with external speaker processor with Z series passive systems. MAKE SURE TO USE HIGH PASS FILTER FOR ALL Z SERIES SYSTEMS TO PREVENT EXCESSIVE CONE MOVEMENT, RESULTING IN TRANSDUCER DAMAGE...
BlueTooth enabled versions. Engages HF 12. LPF BUTTON. Engages the low-pass 17. MAINS OUT. Used for feeding the boost filter for farfiled applications for filter. mains supply to the additional system. versions without BlueTooth support. Z Series User Manual rev 2.10...
Z series powered systems are supplied with CN-0010 PowerCon-E/F CEE 7/7 mains cable (part number 0204000003). Use only original or supplied by manufacturer mains cables! Z series powered systems are equipped with PowerCon B mains power outlets for mains link to additional Z series powered system.
7 operating system. - Start by enabling Bluetooth mode on your Z series speaker (speakers) by pressing down the BT / USER EQ button. The Bluetooth status LED will start to blink to indicate the speaker is ready for connection.
Page 18
- In the appeared window, choose a Z series speaker to add and press “Next“. Each Z series speaker will be shown as different device. - In the next window, choose “Enter the device’s pairing code“ Z Series User Manual rev 2.10...
Page 19
- In the next window verify your device is properly installed and click “close“. Pair additional devices if needed. - Upon pairing with your first ever Z series device, system will automaticaly search and install drivers for your new devices. Allow this process to finish before starting Z Control software suite.
10 operating system. - Start by enabling Bluetooth mode on your Z series speaker (speakers) by pressing down the BT / USER EQ button. The Bluetooth status LED will start to blink to indicate the speaker is ready for connection.
Page 21
- In opened “Bluetooth & other devices“ window click “Add Bluetooth or other device“. - In next window choose “Bluetooth - Mice, keyboards, pens, or audio and other kinds of Bluetooth de- vices“. Z Series User Manual rev 2.10...
Page 22
- In next window, choose the device to pair with from the list of available. Wait for pairing to initialize. - Enter the default “0000” (four zeros) pairing code in the text field and press Connect. Wait for confir- mation of successful pairing and press “Done“. Pair additional devices if needed. Z Series User Manual rev 2.10...
6. Z Control 6.1. Overview Z control is a dedicated software suite designed to unleash the full potential of Z series speakers. Used in conjuction with Bluetooth control interface available in powered speakers, Z control is an easy tool to set up and monitor performance of your Z series installation.
6.3. MAIN window MAIN window provides overview of the connected Z series speakers, volume adjustment, sensor information, utility controls, and grouping. 18. DISCOVERED SELECTED SPEAKER. selected speakers into energy saving voltage of selected speaker. Shows discovered powered Z series standby mode.
Peaking, Low-shelf or High- In order to control speaker user EQ, select the speaker to control from MAIN window first. Press buttons (34) to enable user EQ bands, than adjust with faders (35), (36) and (37). Z Series User Manual rev 2.10...
Page 26
In order to save preset into Stored Preset slot (42), first click (43) Save Preset Button, then click desired Preset button: 1) Click 2) Then Click In order to load preset from Stored Preset slot (42), first click (44) Load Preset Button, then click desired Preset button: 1) Click 2) Then Click Z Series User Manual rev 2.10...
Clicking any speaker of created group will select all speakers of same group, allowing simultaneous control over their parameters. To remove the speaker from group, first click ‘‘Ungroup’’ button, and then the speaker to ungroup. Z Series User Manual rev 2.10...
48. HARDWARE VERSION. Shows 50. SERIAL NUMBER. Shows serial implementation version of the speaker number of selected speaker. 52. BURN BUTTON. Loads selected design. firmware file into the selected speaker. Z Series User Manual rev 2.10...
7. Standard contents Please check the complement of your Z series system upon receiving the package. Standard contents of Z series systems: CN-0010 Z series Polyethylene System Supplied Z series system PowerCon mains Carton Box User Manual cable Z 320-8...
8. Accessories Various accessories are available for Z series systems: N-BOX-4 speaker SAT-3T M20 VA-0016 M10 BOX-CB2 Bag for stand Distance pole Rigging eyebolt for two speaker Part No. 0209000016 Part No. 0209000020 Part No. 0209000018 stands Part No. 0209000017...
MAG Audio distributor frequency drivers and crossovers, whether sold or dealer, or MAG Audio directly. You will be pro- separately or as a component of a speaker system, vided the RMA number code and detailed instruc- is 60 months from the production date.
Page 32
2 Merezhna str., Bila Tserkva, Kyiv region, 09100, Ukraine Tel./Fax.: +38 044 2774789 e-mail: info@mag-audio.com www.mag-audio.com Z Series User Manual rev 2.10...
Need help?
Do you have a question about the Z Series and is the answer not in the manual?
Questions and answers