MAG Fly 6 User Manual page 8

4.1. System operation - Rigging
Fly 6 flying angle reference
1 cabinet
2 cabinets
3 cabinets
Single, two or three Fly 6 cabinets are capable to be flown via FL-01 and FL-02 accessories. Table
above states the angle between horizontal plane and vertical axis of the top-most cabinet. Positive
angle means cabinets are "looking up", negative angle means cabinets are "looking down".
1
Fly 6 with FL-01 and FL-02
flying socket number reference
Attaching two Fly Sub 12s
- On the lower Fly Sub 12 system release
quick lock pins, pull the integrated link up, and
secure it with the quick lock pins.
- Position the lower Fly Sub 12 system so its
integrated link finds support in the upper
cabinet's hardware.
- Secure connection with a quick lock pins.
Refer to the instruction on the system's
hardware for more detailed walkthrough
Attaching Fly 6 to Sub 12
- On the lower Fly 6 system release quick lock
pins, pull the integrated link up, and secure it
with the quick lock pins.
- Position the lower Fly 6 system so its
integrated link finds support in the upper
cabinet's hardware.
- Secure connection with a quick lock pins.
Refer to the instruction on the system's
hardware for more detailed walkthrough
1 2
+ 21° + 12,5°
+ 20,5° + 14°
+ 24,5° + 19,5°
2 3 4 5 6 7
Fly Array User Manual rev 0.1
Flying socket number
3 4
+ 2,5° - 7,5°
+ 8° + 2°
+ 14° + 9 °
" - " angle
5 6
- 16° - 24°
- 4° - 9,5°
+ 4° - 0,5° - 4,5°
" + " angle
7
- 29°
- 15°
8