Table of Contents
Advertisement
Installation Guide for MRI-1000
Supplies and Equipment Needed for MRI-1000 Installation
You may need additional items to complete the installation, including:
• Mobile Satellite phone
• Telephone wiring
o 2 Conductor Telephone Wire. Length as required.
o RJ-11 Crimp Lug, 1 ea
o Volt/Ohm Meter
• Tools
o Telephone test set or analog phone with RJ11 plug
o T25 Torx Driver
o #1 Phillips Screw Driver
o Channel Lock Pliers
o ¾ inch socket 3/8 or ½ inch drive
o ¾ in box end wrench
o Ratchet Handle same drive as socket
o Power Driver or drill motor (Cordless Preferred)
o #2 Phillips bit for power driver or Drill
o Flat Blade Screw Driver with 1/8th inch tip
o RJ-11 Crimper
o Wire Stripper
o Hole Saw for ½ NPT
o Hack Saw
o Drill Bit set
• Screws or other fasteners for wall mount of Junction Box
• ½ in EMT Conduit up to 30 feet
• ½ in EMT clamps with screws
• ½ liquid tight 2 to 3 feet with connectors
• Cable ties
GS-08-1724, v 3.2
3
Advertisement
Table of Contents
