Disassembly; How To Remove The Major Parts; Introduction; How To Read The Disassembly And Assembly - JVC HR-DVS3EK Service Manual

1.1 HOW TO REMOVE THE MAJOR PARTS

1.1.1 Introduction

This set is a double-deck video recorder integrating a Mini DV
deck and a VHS deck. Its internal structure is divided into three
sections that include the power supply, VHS and DV sections.
Therefore, the removal of major parts will also be described
under three separate sections as listed below.
1. COMMON section
2. VHS section
3. DV section
< TOP VIEW >
1. COMMON section
3. DV section
Fig. 1-1-1

1.2 HOW TO READ THE DISASSEMBLY AND ASSEMBLY

Step/
Part name Fig. No.
Loc No.
1
Top cover, Bracket COM1
Front panel COM2 8(L3),
2
assembly
§ §
(1) (2) (3)
(1) Order of steps in Procedure
When reassembling, perform the step(s) in the reverse order.
These numbers are also used as the identification (location) No.
of parts Figures.
(2) Part name to be removed or installed.
(3) Fig. No. showing procedure or part location.
(4) Identification of part to be removed, unhooked, unlocked,
released, unplugged, unclamped or unsoldered.
P= Spring, W= Washer, S= Screw, L= Locking tab, SD= Solder,
CN**(WR**)= Remove the wire (WR**) from the connector
(CN**).
Note:
• The bracketed ( ) WR of the connector symbol are as-
signed nos. in priority order and do not correspond to
those on the spare parts list.
(5) Adjustment information for installation
SECTION 1

DISASSEMBLY

2. VHS section
Point Note
4(S1), 3(S2), 2(L1), (L2)
—
2(S3)
<Note
CN7507(WR1), 1,2,3,4>
CN3011(WR2)
§ § §
(4) (5)

1.3 DISCONNECTION OF CONNECTORS (WIRES)

FPC
CONNECTOR
Fig. 1-3-1
FPC
CONNECTOR
Fig. 1-3-3
FPC
CONNECTOR
Fig. 1-3-5
FPC
CONNECTOR
Fig. 1-3-2
FPC
CONNECTOR
Fig. 1-3-4
1-1