Grounded 3-Conductor Plug; Short Cord Instructions; Plasticizer Warning; Electric Power - Cook's essentials CEPC660 Owner's Manual

GROUNDED 3-CONDUCTOR PLUG

This appliance is equipped with a grounded-type 3-wire cord (3-prong
plug). This plug will only fit into an electrical outlet made for a 3-prong
plug. This is a safety feature. If the plug should fail to fit the outlet,
contact an electrician to replace the obsolete outlet. Do not attempt to
defeat this safety feature.

SHORT CORD INSTRUCTIONS

A short power-supply cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a longer cord.
Do not use an extension cord with this product.

PLASTICIZER WARNING

CAUTION: To prevent Plasticizers from migrating from the
finish of the counter top or table top or other furniture, place
NON-PLASTIC coasters or place mats between the appliance
and the finish of the counter top or table top.
Failure to do so may cause the finish to darken, permanent
blemishes may occur or stains can appear.

ELECTRIC POWER

If the electrical circuit is overloaded with other appliances, your
appliance may not operate properly. It should be operated on a
separate electrical circuit from other appliances.
A NOTE REGARDING YOUR NEW COOK'S ESSENTIALS™
PROGRAMMABLE ELECTRIC PRESSURE COOKER
FEATURING DUPONT® TEFLON® WITH SCRATCHGUARD™
Congratulations on your purchase of Cook's Essentials™
Programmable Electric Pressure Cooker featuring DuPont®
Teflon® with ScratchGuard. ™ The special coating on your
Programmable Electric Pressure Cooker has been designed to
add durability and ease of use and cleaning. The special ceramic
fillers in the coating make it safe for use with metal utensils.
Please note that minor surface marring may occur, but will not
affect the non-stick performance.
Care and cleaning of your Programmable Electric Pressure
Cooker is a snap with the ScratchGuard™ coating, as it has been
designed to be completely non-stick. Washing or rinsing with
warm, soapy water and a sponge or a cloth is all that is needed.
Do not use steel wool, coarse scouring pads or harsh abrasives
on any surface coated with ScratchGuard. ™
3