Drying unit (TA)
Changing the coarse filter
The coarse filter should be changed
when the message CHANGE COARSE
FILTER flashes in the display.
^ Open the door of the storage cabinet.
^ Take out the metal perforated plate at
the drying unit.
Cleaning and Care
^ Change the coarse filter. The soft
filter side must face the front.
^ Replace the perforated plate by
positioning it at the base and
pressing it into place at the top.
^ Close the door.
After the coarse filter has been
changed, set the operating timer to
zero.
^ Select the program CHANGE TA
COARSE (see "Use - B. Free program
selection).
^ Press the "Start" 6 button.
When the service program has ended,
a message appears in the display.
^ To üCONTINUE< press "Start" 6.
41