Cleaning The Water Inlet Filters - Miele G 7836 CD Operating And Installation Instructions

Cleaning and Care

Cleaning the water inlet filters

To protect the water inlet faucet, filters
are incorporated in the intake hose
attached to the water supply. If the
filters are soiled they must be cleaned
to ensure sufficient water intake to the
wash cabinet.
,
The plastic faucet housing on
the intake hose contains electrical
components and should not be
submerged, or run through water.
40
Cleaning the filter
^ Disconnect the machine from
electricity (unplug it or "trip" the
circuit breaker).
^ Close the water supply and unscrew
the water inlet faucet.
^ Carefully remove the rubber seal.
^ Take out the filters with needle nose
pliers.
^ Rinse the large area filter (1) and fine
filter (2) under running water, and
replace if necessary.
^ Return filters and seal. Make sure
they are seated correctly.
^ Screw the water inlet faucet onto the
water faucet, checking that it is not
cross-threaded.
^ Open the water supply.
^ Check for leaks.