Table of Contents
Advertisement
12
www.electrolux.com
6.4 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on
immediately when the oven starts to heat.
7. USING THE ACCESSORIES
7.1 Using the core temperature
sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature. Refer to the
table for roasting.
• The core temperature. Refer to the
table for the core temperature sensor.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the front of
If you set the MINUTE
MINDER when the
DURATION or END function
operates, the symbol
comes on in the display.
WARNING!
Refer to Safety chapters.
CAUTION!
Only use the core
temperature sensor supplied
with the appliance, or
genuine replacement parts.
To reset the Count Up Timer, press and
hold
up again.
the appliance.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default
core temperature is 60 °C. While
flashes, you can use the knob for the
temperature to change the default
core temperature.
The display shows the symbol of the core
temperature sensor and the default core
on the
temperature.
4. Press
temperature, or wait 10 seconds for
the setting to be saved automatically.
The new default core temperature is
displayed during the next use of the core
temperature sensor.
When the meat is at the set core
temperature, the symbol for the core
temperature sensor
core temperature flash. An acoustic signal
sounds for two minutes.
and
. The timer starts to count
The Count Up Timer cannot
be used with the functions:
Duration
, End
temperature sensor.
to save the new core
and the default
, core
Advertisement
Table of Contents
