Park Air T6T User Manual page 63

6. Setting the Line Level.
[Factory default setting: -13 dBm]
The audio line level can be set to any value between -40 dBm and 0 dBm. Some notes regarding
the optimum line level are given on page 22.
From the Function menu, turn the switch
clockwise until Line Level is highlighted, then
press the switch.
Check that the Line Level menu is displayed
and that Line Lvl is highlighted, then press the
switch.
Turn the switch clockwise or anti-clockwise to
increase or decrease the value. When the
required value is displayed, press the switch.
Turn the switch to highlight OK and then press
the switch. You are returned to the Function
menu.
7. Setting the Output Power.
[Factory default setting: 50 W]
The transmitter's output power can be set to any value between 5 watts and 50 watts (in one watt
steps).
From the Function menu, turn the switch
clockwise until Power is highlighted, then
press the switch.
Ensure that the Power menu is displayed and
that Power is highlighted.
Press the switch. Turn the switch clockwise to
increase the power, or anti-clockwise to
decrease the power. When the required value
is displayed, press the switch. Turn the switch
clockwise until OK is highlighted, then press
the switch. You are returned to the Function
menu.
T6T AM-Voice Operation
I n h i b i t
L i n e L e v e l
P o w e r
L i n e L v l
C a n c e l
I n h i b i t
L i n e L e v e l
P o w e r
P o w e r
C a n c e l
< < > >
- 1 3 d B m
O K
< < > >
5 0 W
O K
Section 2
Page 31