Park Air T6T User Manual page 62

4. Setting the LCD Backlight.
[Factory default setting: 30 s]
The LCD's backlight can be set to off,
permanently on, or timed to stay on for a
period between 15 and 120 seconds
(adjustable in 15 second steps) after the
Scroll/Select switch was last operated.
Check that the Function menu is displayed
and ensure Display is highlighted. Press the
switch.
Ensure the Backlight menu is displayed and
the Backlight setting is highlighted. Rotation
of the switch displays the full range of
settings. When the required setting is
highlighted, press the switch. Turn the switch
until OK is highlighted, then press the switch.
You are returned to the Function menu.
5. Setting Inhibit.
[Factory default setting: Off]
Inhibit can be set to either On or Off. When set to on, the transmitter cannot be keyed; when set to
off the transmitter operates normally. Note that a separate Inhibit function is available on the
Facilities connector CN5 (see pin-out in section 1 on page 17).
From the Function menu, turn the switch
clockwise until Inhibit is highlighted, then
press the switch.
Check that the Inhibit menu is displayed and
Inhibit is highlighted. Pressing the switch
toggles between On and Off. When the correct
setting is displayed turn the switch clockwise
to highlight OK, then press the switch. You are
returned to the Function menu.
Section 2
Page 30
M o d e
R e f e r e n c e
D i s p l a y
B a c k l i g h t
C a n c e l
I n h i b i t
L i n e L e v e l
P o w e r
I n h i b i t
C a n c e l
T6T AM-Voice Operation
F r e q
> >
O F F
O K
< < > >
O N
O K