Am Voice Settings Procedure - Park Air T6T User Manual

AM VOICE SETTINGS PROCEDURE

During this procedure, the following parameters, applicable to AM voice operation, will be set:
Mode of operation
q
PTT timeout
q
Mute enable or disable
q
Selecting a carrier offset
q
Selecting the channel spacing.
q
1. From the Main screen, press the switch to
display the Options menu. Turn the switch
until Configure is highlighted. Press the
switch.
2. Ensure the Configure menu is displayed.
Turn the switch until Settings is highlighted,
then press the switch.
3. Check that the Function menu is displayed.
Ensure Mode is highlighted. Press the
switch.
4. Setting the Mode of Operation.
Check that AM Voice is displayed. If any other mode is displayed, press the switch until AM Voice
is shown.
Turn the switch clockwise until Settings is
highlighted. Then press the switch to display
the mode specific Settings menu.
T6T AM-Voice Operation
PTT test facility
q
Modulation depth
q
Vogad enable or disable
q
Adjusting the sidetone volume
q
F r e q u e n c y
C h a n n e l
C o n f i g u r e
B I T
Options Menu
S e t t i n g s
S / W V e r s i o n s
S t a n d b y
B a c k
Configure Menu
M o d e
R e f e r e n c e
D i s p l a y
Function Menu
M o d e : A M
S e t t i n g s
C a n c e l
E x i t
E x i t
F r e q
> >
V o i c e
O K
Section 2
Page 25