Back Up/Restore Track 0 - Western Digital WD Caviar Installation Manual

EZ-BIOS: Initializing . . .
EZ-BIOS: Hold the CTRL key down for Status
Screen or to boot from floppy . . .
Note: This message will not display if you reboot the system
with a floppy disk in the floppy drive.
2. Press and hold down the
Note: If the system boots to the operating system without
displaying the status screen, you pressed the
early or too late. Reboot and try again.
3. Read the screen prompt and type A.
4. Insert a bootable disk (DOS system disk or Windows 95
Startup disk) into drive A. Press any key.
The operating system loads from floppy disk, and EZ-BIOS
correctly accesses your hard drive.

Back Up/Restore Track 0

Use this option to back up and restore Track 0 on any hard
drive in a system with an existing hard drive. Track 0 contains
EZ-BIOS code and important information about the partition.
This option does not back up user data.
If installing your new drive as a slave drive, EZ-Drive
automatically creates a backup of Track 0 on the master drive
(boot drive) before it partitions and formats the drive. If you
ever have trouble booting the system, use this option to restore
Track 0.
To Back up Track 0
1. Boot from your EZ-Drive disk.
2. From the EZ-Drive main menu, select Backup/Restore
Track 0.
24 EZ-Drive Software Installation
key. A status screen displays.
CTRL
key too
CTRL