Troubleshooting; Frequently Asked Questions - Prestigio Nobile 1560 User Manual

Hide thumbs Also See for Nobile 1560:

Table of Contents

4. Press Enter to accept the changes and save the password.

HANGING OR REMOVING A PASSWORD

Follow these steps:

1. Use the \/ and \/ keys to highlight a password parameter and press Enter. The following box appears.

2. Enter the current password, then press Enter.

• To change the password, type in a new password in the Enter New Password field and press Enter. Then re-enter the

password in the Confirm New Password field and press Enter.

• To remove the password, press Enter twice (once each in the Enter New Password and Confirm New Password fields)

without typing anything in the fields.

Press Enter to accept the changes.

BOUT THE BOOT DRIVE SEQUENCE

In the Boot menu, use the cursor up/down keys (/\ \/) to select a boot device, then press F5 or F6 to change its order. Items

with a "+" sign can be further expanded.

Troubleshooting

This chapter instructs you on how to deal with common system problems. Read it before calling a technician if a problem

occurs. Solutions to more serious problems require opening up the computer. Do not attempt to open and service the

computer by yourself. Contact your dealer or an authorized service center for assistance.

Frequently-asked questions

This is a list of possible situations that may arise during the use of your computer, and it gives easy answers and solutions

to these questions.

PRESS THE POWER SWITCH

BUT THE COMPUTER DOES NOT START OR BOOT

Look at the Power indicator:

• If it is not lit, no power is being applied to the computer. Check the following:

• If you are running on battery power, it may be low and unable to power the computer. Connect the AC adapter to recharge

the battery pack.

• Make sure the AC adapter is plugged in properly to the computer and to the power outlet.

• If it is lit, check the following:

• If the Standby indicator is lit, the computer is in Standby mode. Press the power button to resume.

• Is a non-bootable (non-system) diskette in the floppy drive? Remove or replace it with a system diskette and press Ctrl-

Alt-Del to restart the system.

The operating system files may be damaged or missing. Insert the startup disk you created during Windows setup into the

floppy drive and press Ctrl-Alt-Del to restart the system. This will diagnose your system and make necessary fixes.

PRESTIGIO NOBILE 1560

Table of Contents