Furuno FCR-21X9 Operator's Manual page 3

Radar Display Indications
REF point box
Range/Presentation
Selects the reference
mode box point (antenna or CCRP)
for measurements
- Selects the radar range.
(range, bearing, etc.) and
- Selects the presentation
markers (position, etc.)
mode.
Tuning bar
Shows tuning
condition.
InstantAccess bar (see page 6)
Quick access to often-used radar, chart radar functions.
Watch box
Counts down the time remaining until the
buzzer sounds to alert the operator to view the
radar picture.
PI line box
• Adjusts the direction and width of the parallel
index lines.
• Activates or deactivates the parallel index lines.
Mark box
Selects the mark to inscribe on the radar
display.
Cursor position box
This box shows
- Cursor position and TTG to
the cursor position.
- Range and bearing to the
cursor position.
Status bar
- X, Y coordinates of cursor
(see page 5)
position.
Message
area
Drop mark box 1 Drop mark box 2
Shows the bearing Shows the bearing
and range to the drop and range to the drop
mark 1. mark 2.
EBL1, 2 boxes
Bearing to EBL1, EBL2.
Sensor information box
Shows your ship's heading, heading source, ship's speed, water tracking speed,
speed source, course over ground, speed over ground, position, chart datum.
Menu
Drop-down menu with various radar and chart radar functions.
NAV data
NAV data Route 1 Route 1 Route 2 Route 2
Depth : Depth : 22.5 m 403 m
0 0
100
10
200
20 Water Water
300 30
TEMP : TEMP : 10.5°C 3.7°C
400 40
500 50
-30 -20 -30 -20 -10 min m -10 min m
N N REL : Wind True-North
006.3°R
Wind : 12.1 m/s
124.5° 20.1 kn
W W E E
Current : 121.3°R
Current
25.9 kn 1.7 kn
177.6°T
S
S
VRM1, 2 boxes
Range and TTG* to VRM1, VRM2.
* Function activated from menu.
3
NAV data/Route information box
Provides various navigation data and route information.
TT/AIS setting box
Sets the conditions for TT
and AIS targets.
Past POSN, Trail box
Sets the conditions for the
past position display and
target trails.
Alert box
Shows alert messages by
alert name and alert number.
Target List button
Displays the target list.
Trial maneuver
box
Acquisition zone box
Sets the conditions
Sets an acquisition zone for
for the trial maneuver.
TT, AIS.