Datalogic Falcon X3 Quick Reference Manual page 7

b. Shift the cardholder to the right and then pull it up; insert the Micro SD card with the
written part upward.
c. Lock the card into place by pushing the cardholder down and then shifting it to the left;
pull the locking plate down.
Replace battery.
6.
To remove the Micro SD card, follow the steps above to access the SD area, and remove it from its
slot.
Follow proper ESD precautions to avoid damaging the SD. Proper ESD precautions
include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
CAUTION
Do not force the card. If you feel resistance, remove the card, check the orientation,
and reinsert it.
Do not use the Micro SD card slot for any other accessories.