3.2
CONNECTION TO USB PERIPHERALS
You can use a standard A (4 pin female) to mini A (5 pin male) USB cable to connect the Datalogic
FALCON™ to a keyboard or a memory. For all these devices maximum current withdrawal must be
below 100mA.
A
Key:
A Keyboard with USB
interface
B Datalogic
FALCON™
A
Key:
A USB hard drive/
external memory source
B Datalogic
FALCON™
C
C 94A051024 (Standard A to
Mini A USB cable)
C
C 94A051024 (Standard A to
Mini A USB cable)
Connect first the USB peripheral to the cable, and then the cable
to the Datalogic FALCON™.
NOTE
Datalogic FALCON™ works with most of mentioned USB
peripherals. In any case, we can't guarantee good operations with
all devices available on market place.
NOTE
Connection is compliant to 1.1 USB standard.
NOTE
B
B