Datalogic Falcon X3 Quick Reference Manual page 21

3.3 RS232 CONNECTION
You can use a cable to directly connect the Datalogic FALCON™ to a host computer to transfer data
through the RS232 interface.
A
Key:
A) Host Computer
B) 94A051022 WIN-
NET
(HRS ST40X-18S-
CV)
The Single Cradle can be connected to the Host by any standard 9-pin serial null-modem cable for
RS232 communications.
Once the Host has been turned on, insert the Datalogic FALCON™ mobile computer into the cradle.
A
Key:
A) Host Computer
B) 94A051020 CAB-427
Null-Modem
In this case the power supply is only necessary for battery charging. Insert the power supply plug into
the power jack on the base of the cradle and attach the power supply to a power outlet.
The actual data transfer speed can be appreciably lower than the
maximum theoretical speed.
NOTE
B
C) Datalogic FALCON™
B
D
C) Single Cradle
D) *Power Supply (only
necessary for battery
charging)
C
C