Cleaning The Tool - Worx WG545.4 Manual

STORAGE
WARNING! Store the blower
indoors, in a cool dry location, out
of reach of children and animals.
1. ASSEMBLY THE WALL MOUNT
BRACKET
Attach the wall-mount bracket to the wall with
the screws provided.
Tighten all the screws securely. Carefully
check the bracket after mounting to make sure
that no movement can occur during use. (See
Fig. G1).
WARNING! Always make sure your
wall-mount bracket is securely mounted
to the wall. Failure to do so could result in
an accident, resulting in possible serious
personal injury.
2. STORING YOUR BLOWER
The blower can be stored into the wall mount
bracket (7) as illustrated (See Fig. G2).
Store in a dry place where your blower can be
protected from damage.

CLEANING THE TOOL

Clean the tool regularly.
WARNING! Keep your product dry.
Under no circumstances spray with
water.
- To clean the tool, use only mild soap and a
damp cloth.
WARNING! Do not use any type of
detergent, cleaner or solvent which
may contain chemicals that could seriously
damage the plastic.
- Self lubricating bearings are used in your
product, therefore lubrication is not required.
20V Max Lithium multi-purpose sweeper EN
13