Resetting The Unit; Maintenance & Cleaning - Bresser MyTime Duo Instruction Manual

Set month:
Slide SET button into DATE SET mode, the month mode
will blink. Press HOUR/MONTH button to reach the
desired hour.
Set minute:
Slide SET button (8) into TIME SET mode, the time mode
will blink. Press MIN/DATE button to reach the desired
minute.
Set date:
Slide SET button into DATE SET mode, the month mode will
blink. Press MIN/DATE button to reach the desired date.
AL SELECT slide-button (7)
Slide AL SELECT button (7) to switch the alarm function
between WORKING DAY mode (fi ve days alarm) and
NORMAL mode (one day single alarm).
Slide the button into WORKING DAY side,
shown on displays.
BACKGROUND ILLUMINATION AND SNOOZE FUNCTION
Press the SNOOZE/LIGHT button (2) to turn on the LED
backlight for 10 seconds.
Press SNOOZE/LIGHT button when the alarm sounds to
interrupt the alarm for 5 minutes. Slide AL ON/OFF slide-
button to AL OFF position to deactivate the alarm.

RESETTING THE UNIT

In case of malfunction or abnormal display, take out and
re-install the batteries again. All settings will be cleared
and reset to their default values.
MAINTENANCE/CLEANING
Before cleaning the device, disconnect it from the power
supply (remove batteries).
Only use a dry cloth to clean the exterior of the device. To
MO-FR is
DE
GB
FR
NL
IT
ES
13