Programming Track Numbers; Reviewing The Programme; Erasing A Programme - Philips MZ-3 User Manual

Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before
or during playback. The play modes can also be combined
with PROGRAM.
SHUFFLE . . . . . . . . . . tracks of the entire CD/ programme
are played in random order
SHUFFLE and
REPEAT ALL . . . . . . . . to repeat the entire CD/ programme
continuously in random order
REPEAT ALL . . . . . . . . repeats the entire CD/ programme
continuously
REPEAT . . . . . . . . . . . repeats the current track
continuously
1 To select your play mode before or during playback,
press either
• on the remote control SHUFFLE or REPEAT
• on the set CLOCK repeatedly until the display shows the
desired function.
2 Press 2; to start playback if in the STOP position.
™ If you have selected SHUFFLE, playback starts
automatically.
3 To return to normal playback, press the respective
SHUFFLE or REPEAT button until the various
SHUFFLE/ REPEAT modes are no longer displayed.
– You can also press 9 to cancel your play mode.
MC 158 COM MC 158 COM
PAC T AUD IO PAC T AUD IO
IO IO
IO IO SYS TEM SYS TEM
IO IO
II II CD
DBB
SHUFF LE
IO IO PROGR AM
II II
IO IO
II II
IO IO
II II
IO IO
IO IO
I II I II

Programming track numbers

Programme in the STOP position to select and store your CD
tracks in the desired sequence. If you like, store any track more
than once. Up to 40 tracks can be stored in the memory.
1 Press PROGRAM on the set or remote control to enter
the programming mode.
™ A track number is shown and
PROGRAM
2 Use the ¡1 or 2™ on the set, (on the remote control
¡ or ™) to select your desired track number.
3 Press PROGRAM to confirm the track number to be
stored.
™ The number of tracks programmed and total playing
time of the programme is shown briefly, then the
selected track and PROG.
™ ... : ... is shown if total playing time is 100
minutes or more.
4 Repeat steps 2-3 to select and store all desired tracks.
™ FULL is displayed if you attempt to programe more
than 40 tracks.
5 To start playback of your CD programme, press 2; .

Reviewing the programme

OPEN OPEN
CLOSE CLOSE
• In STOP mode, press and hold down PROGRAM on the
set or remote control, until the display shows all your
PRESET PRESET
stored track numbers in sequence.
TUNING TUNING

Erasing a programme

You can erase the programme by:
– pressing 9 once in the STOP position;
– pressing 9 twice during playback;
– opening the CD tray.
• CLEARED is shown briefly and
from the display.
flashes.
disappears
PROGRAM
9