Home Channel Priority; Wx Channel Priority; Priority Revert Mode - Yaesu FT-65R Advance Manual

Scanning

HOME Channel Priority

1. Recall the memory channel to be used as the "Priority" frequency.
2. Set the Transceiver for operation on a HOME channel by pressing the F key followed
by the [P1] key.
3. Press the F key, then press the [ V/M] key to activate the HOME Channel Priority
mode.
The display will remain on the HOME channel frequency, but every five seconds the
transceiver will check the Priority Channel (memory channel) for activity.
4. Press the F key, then press the [ V/M] key again to disable the HOME Priority mode.

WX Channel Priority

1. Recall the memory channel to be used as the "Priority" frequency.
2. Set the Transceiver for operation on a WX channel by pressing and holding the [1]
key.
3. Press the F key, then press the [ V/M] key to activate the WX Priority mode.
The display will remain on the WX channel frequency, but every five seconds the
transceiver will check the Priority Channel (memory channel) for activity.

Priority Revert Mode

During Priority channel operation, a special feature is available which will allow moving to
the Priority channel instantly, without waiting for activity to appear on the Priority channel.
When this feature is enabled, and Priority monitoring is engaged, just press the PTT
switch; operation will instantly revert to the Priority channel.
1. Press and hold the F key to enter the Set Mode.
2. Press the [▲] or [▼] key to select Set Mode Item
"23 PRI. RVT".
3. Press the F key to enable adjustment of this item.
4. Press the [▲] or [▼] key to select "RVT . ON" or "RVT . OFF (default setting)".
5. Press the PTT switch to save the new setting and return to normal operation.
FT-65R/FT-65E Advance Manual

Every 5 seconds

Every 5 seconds
21