Safety Symbols; Symbol Meaning; Safety Instructions - EGO CS1400E Operator's Manual

READ ALL INSTRUCTIONS!
READ & UNDERSTAND
INSTRUCTION MANUAL
Residual risk!
People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understand-
ing. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety
instructions in this Operator's Manual, including all safety
alert symbols such as "DANGER," "WARNING," and
"CAUTION" before using this tool. Failure to following all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:
ING, or CAUTION. May be used in conjunction with other
symbols or pictographs.
WARNING:
power tools can result in foreign objects
being thrown into your eyes, which can
result in severe eye damage. Before
beginning power tool operation, always
wear safety goggles or safety glasses with
side shields and a full face shield when
needed. We recommend a Wide Vision
Safety Mask for use over eyeglasses or
standard safety glasses with side shields.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
6
56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E
Indicates DANGER, WARN-
The operation of any
Safety Alert
Read the
Operator's
Manual
Wear Eye
Protection
Wear Ear
Protection
Wear Head
Protection
Wear
Protective
Gloves
Guide Bar
xxxxxxxxxx
Be Aware
of Kickback
Guide
Bar Tip
Kickback
Two Hand-
ed Hold
Ingress
IPX4 Protection
Degree
V Volt
A Amperes
Hz Hertz
W Watt
min Minutes
Indicates a potential
personal injury hazard.
To reduce the risk of
injury, user must read
operator's manual.
Always wear safety gog-
gles or safety glasses
with side shields and
a full face shield when
operating this product.
Always wear ear protec-
tion when operating this
product.
Wear an approved safety
hard hat to protect your
head.
Protect your hands with
gloves when handling
saw and saw chain.
Heavy-duty, nonslip
gloves improve your grip
and protect your hands.
The information of guide
bar.
Contact of the guide
bar tip with any object
should be avoided
Tip contact can cause
the guide bar to move
suddenly upward and
backward, which can
cause serious injury.
Always use two hands
when operating the
chain saw
Protection from splashing
water
Voltage
Current
Frequency
(cycles per second)
Power
Time