Page 1
OPERATOR’S MANUAL 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW MODEL NUMBER CS1400E/CS1600E WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference.
Page 2
4. Oil Tank Cap 3. Battery-release 7. Guide Bar Button 6. Saw Chain 5. Oil Inspection 2. Lock-off Button Window 1. Trigger Switch 8. Latch 10. Electric Contacts 12. Chain Tensioning 9. Ejection Mechanism Knob 20. Sprocket in Guide Bar Tip 11.
Page 3
Chain kickback brake handle in operating position Chain kickback brake handle in brake position Pull Push Chain Tensioning Knob Side Cover Side Cover Knob Lift the Tip of the Guide Bar Up to Check for Sag Chain Drive Links Guide Bar Groove Guide Bar Slot Tension Sprocket...
Page 4
1.3 mm Felling direction Safety retreat path Safety retreat path 45°...
Page 5
Direction of fall 50 mm Felling back cut Notch 50 mm Hinge...
This page depicts and describes safety symbols that may Frequency Hertz appear on this product. Read, understand, and follow (cycles per second) all instructions on the machine before attempting to Watt Power assemble and operate. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Improperly Liquid ejected from the battery may cause irritation tensioned or lubricated chain may either break or or burns. increase the chance for kickback. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Page 9
Make sure that the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, fence, or any other obstruction that could be hit while you are operating the saw. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Do not charge the battery pack in rain or in wet Guide bar locations. Chain sheath ◾ Plan the work, ensuring an obstacle-free work area and, in the case of felling, at least one escape path Operator’s manual from the falling tree. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Turn the chain tensioning pack from the tool when assembling parts. knob clockwise to tension the chain. See the section: “REPLACE THE BAR AND CHAIN” for additional ASSEMBLING/REPLACING THE BAR AND CHAIN information. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Oil may spill and cause 1. Release the trigger switch. a fire. 2. Push the chain kickback brake handle forward to the brake position to engage the chain brake (Fig. G). 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Page 13
Be alert for overhead limbs falling and watch your footing. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Use only low-kickback chains on this saw. This fast cut- WARNING: When cleaning the chain saw, DO NOT ting chain will provide kickback reduction when properly immerse in water or other liquids. maintained. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Use a grease syringe to lubricate weekly with chain oil by means of the lubricating hole. Turn the guide bar and check that the lubrication holes and chain groove are free from impurities. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Debris preventing full movement of Clean debris from external chain brake the chain kickback brake handle. mechanism. Chain brake does not engage ◾ ◾ Possible chain brake malfunction Contact EGO Customer Service. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
Page 17
◾ ◾ Chain oil tank is empty. Filling bar and chain lubricant. Bar and chain running hot and smoking ◾ ◾ Debris in guide bar groove. Clear the debris in the groove. 56 VOLT LITHIUM-ION CORDLESS CHAIN SAW — CS1400E/CS1600E...
New Zealand 0508 000 EGO (0508 000 346) any time you have questions or warranty claims. LIMITED SERVICE WARRANTY FOR FIVE YEARS from the date of original retail purchase, this EGO product is warranted against defects in material or workmanship. Defective product will receive free repair.
Need help?
Do you have a question about the CS1400E and is the answer not in the manual?
Questions and answers