Table of Contents
Advertisement
EVI-370 series
CONTROL METHODS
Camera Control Methods
Power supply
Supply 6.0 to 12.0 V to CN301 (VC-192/201 board) using the harness provided.
Red (No.1) is +.
Video signal output
Composite video and Y/C video are output to CN001 (VC-192/201 board).
Backup switch (MD-71/73 board S104)
Zoom switches and focus positions (position preset) can be memorized in the camera by turning on the backup switch.
The backup battery is a re-chargeable battery.
It can backup for 12 weeks when fully charged.
At shipment, it is set to off.
Function Control Methods
IF-67 board
The IF-67 board can control the focus and zoom of the lens easily (key-switch).
Auto focus ON/OFF
• When the AF ON/OFF switch is pressed, ON/OFF is switched and the LED lights up when AF is ON.
• When the FOCUS FAR or NEAR switch is pressed (auto-focus is off) focus can be adjusted.
Zoom adjustment
Zoom (image angle) can be adjusted by pressing the zoom TELE or WIDE switch.
Time/Date set and display.
GN-3 board
Gen Lock adjustment.
Using VISCA™/RS-232C interface
Functions can be controlled using the RS-232C port of computers, etc.
It is possible to control a camera and read the camera data.
For details, see "Command List".
22
Advertisement
Table of Contents
