Bulb Replacement - Honda NAVI 2016 Owner's Manual

BULB REPLACEMENT

Refer to the Safety Precautions on page 40.
The light bulb becomes very hot while the
light is ON, and remain hot for a while after
it is turned OFF. Be sure to let it cool down
before servicing.
• Be sure to turn the ignition switch OFF
when replacing the bulb.
• Do not use bulbs other than those
specified.
• After installing a new bulb, check that
the light operates properly.
Honda Motorcycle & Scooter India Pvt. Ltd.
POSITION LIGHT BULB
1. Remove the front cowl (1) by removing
4 screws (2). Carefully hold it from the
lower end.
2. Disconnect the connectors (3).
3. Remove the position light bulb (4) by
pulling it .
4. Install a new bulb in the reverse order
of removal.
(2)
(1)
(3)
(4)
¼Ýa V dkmy½
(1) Front cowl
¼LØw ½
(2) Screw
¼dus D Vj½
(3) Connector
(4) Position light Bulb
¼iks f t"ku ykbZ V cYc½
63