Honda NAVI 2016 Owner's Manual page 64

Front Wheel Installation
1. Position the wheel between the fork legs
and insert the front axle from the left
side, through the left fork leg, wheel
hub, collar and right fork leg.
Make sure that the tang (11) on the left
front fork leg is located in the slot (12)
in the brake panel.
2. Tighten the front axle nut to the
specified torque.
59 N.m (6.0 kgf.m, 43 lbf.ft)
(11) Tang ¼VS a x ½
(12) Slot ¼LykW V ½
56
3. Adjust the brake (page 13 - 14).
4. After installing the wheel, apply the
brake several times and then check if
the wheel rotates freely. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
If a torque wrench was not used for
installation, see your Honda dealer
as soon as possible to verify proper
assembly. Improper assembly may lead
to loss of braking capacity.
(12)
(11)
Honda Motorcycle & Scooter India Pvt. Ltd.