Honda CB UNICORN DAZZLER 2010 Owner's Manual page 59

wetfouled plug with a plug cleaner,
otherwise use a wire brush.
(1) Spark plug cap ¼LikdZ Iyx ds i ½
(2) Plug wrench
¼Iyx js a p ½
4. Check the spark plug gap (3) using a
wire-type feeler gauge. If adjustment
is necessary, bend the side electrode
(4) carefully.
The gap should be:
0.8-0.9 mm(0.03-0.04 in)
5. With the plug washer attached, the
spark plug in by hand to prevent cross-
threading.
(3) Spark plug gap ¼LikdZ Iyx xS i ½
(4) Side electrode ¼lkbZ M bZ y S D Vª k s M ½
6. Tighten the spark plug:
• If the old plug is good:
1/8 turn after it seats.
• If installing a new plug, tighten it twice
to prevent loosening:
a) First, tighten the plug:
NGK 1/2 turn after it seats.
b) Then loosen the plug.
c) Next, tighten the plug again:
1/8 turn after it seats.
51