Cleaning - Honda CB UNICORN DAZZLER 2010 Owner's Manual

CLEANING

Clean your motorcycle regularly to protect
the surface finishes and inspect for damage,
wear, and oil or brake fluid leakage.
Avoid cleaning products that are not
specifically designed for motorcycle or
automobile surfaces.
They may contain harsh detergents or
chemical solvents that could damage the
metal, paint, and plastic on your motorcycle.
If your motorcycle is still warm from recent
operation, give the engine and exhaust
system time to cool off.
We recommend avoiding the use of high
pressure water
coinoperated car washes).
NOTICE
High pressure water (or air) can damage
certain parts of the motorcycle.
74
spray (typical
Washing the motorcycle
1. Rinse the motorcycle thoroughly with
cool water to remove loose dirt.
2. Clean the motorcycle with a sponge or
soft cloth using cool water.
Avoid directing water to muffler outlets
and electrical parts.
3. Clean the plastic parts using a cloth or
sponge dampened with a solution of
mild detergent and water. Rub the soiled
area gently rinsing it frequently with
fresh water.
Take care to keep brake fluid or
chemical solvents off the motorcycle.
They will damage the plastic and
in
painted surfaces.
The inside of the headlight lens may be
clouded immediately after washing the
motorcycle. Moisture condensation inside the
headlight lens will disappear gradually by
lighting the headlight in high beam. Run the
engine while keeping the headlight on.