Operation; General Information - PS Engineering PMA6000 Pilot's Manual And Operation Manual

OPERATION

GENERAL INFORMATION

SCOPE
This section provides detailed operating instructions for the PS
Engineering PMA6000, PMA6000M, PMA6000C, and
PMA6000M-C, Audio Selector Panel/Intercom Systems.
Please read it carefully before using the equipment so that you
can take full advantage of its capabilities.
This guide is divided into four sections covering the basic op-
erating areas of the PMA6000 systems. They are: Audio Selec-
tor, Transceiver Selection, Intercom, and Marker Beacon Re-
ceiver (6000M, and 6000M-C only).
Audio Selector (All models)
mentary switches.
When selected, an internal backlight will illuminate indicating
which audio source is selected. Because the rotary switch con-
trols what transceiver is being heard by the pilot and copilot
(the crew), "Cl" (Com 1) and "C2" (Com 2) push-buttons are
of the momentary type and do not remain in when selected.
This is also part of the "auto function." You will always hear
the audio from the transceiver that is selected by the rotary mic
selector switch.
The users can identify which receivers are selected by noting
which push-button switches are illuminated. Push buttons la-
2 202-066-0001
Figure 1 Audio Selector
Through the use of two momen-
tary and seven latched, push-
button, back-lit switches, it is
possible to select any or all re-
ceiver audio. C1 and C2 are mo-
PMA6000-Mono Pilot Guide
returned to PS Engineering, or a certified PS Engineering
Service Center, for repairs.
This warranty is not transferable. Any implied warranties ex-
pire at the expiration date of this warranty. PS Engineering
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-
QUENTIAL DAMAGES. This warranty does not cover a de-
fect that has resulted from improper or unreasonable use or
maintenance as determined by us. This warranty is void if there
is any attempt to dissemble this product without factory
authorization. This warranty gives you specific legal rights,
and you may also have other rights which may vary from state
to state. Some states do not allow the exclusion of limitation of
incidental or consequential damages, so the above limitation or
exclusions may not apply to you.
Factory Service
The unit is covered by a 3-year limited warranty. See warranty
information. Contact PS Engineering, Inc. at (865) 988-9800
or www.ps-engineering.com/support.shtml before you return
the unit. This will allow the service technician to provide any
other suggestions for identifying the problem and recommend
possible solutions.
After discussing the problem with the technician and you ob-
tain a Return Authorization Number, ship product to:
Service Department
PS Engineering, Inc.
9800 Martel Rd
Lenoir City, TN 37772
(865) 988-9800 FAX (865) 988-6619
Email: intercoms@ps-engineering.com
Note: PS Engineering will not be responsible for units shipped
using US Mail. Units that are received without an RMA num-
ber, or a detailed description of the problem and a contact
phone number will be refused.
PMA6000 –Mono Pilot Guide 202-066-0001 11