This guide is divided into four sections covering the basic op- to state. Some states do not allow the exclusion of limitation of erating areas of the PMA6000 systems. They are: Audio Selec- incidental or consequential damages, so the above limitation or tor, Transceiver Selection, Intercom, and Marker Beacon Re- exclusions may not apply to you.
Com 1 allowing transmit and receive capa- PS Engineering, Inc. warrants this product to be free from de- bility regardless of unit condition. Any time fect in material and workmanship for a period of three (3)
Page 4
Marker Beacon (PMA6000M, PMA6000M-C) Important: When the mic selector is in the full counter clock- wise position, the PMA6000 power is removed, and it is in the The optional Marker Beacon Receiver uses visual and audio mode. The pilot headset and microphone are con-...
Turning the rotary switch to C 2 places the tercommunications. PMA6000 into "Split Mode". This places the pilot on Com 1 Soft Mute and the copilot on Com 2. Pilot and copilot are isolated from each other on the intercom, but can use their respective radios Soft Mute must be enabled during installation by jumpering simultaneously.
Page 6
Intercom Adjusting the VOX-Squelch control Volume Control (6000, 6000M, 6000C, 6000MC) The PMA6000 provides adjustable VOX squelch controls for Figure 4 Volume Controls the pilot and copilot (the copilot's VOX control also adjusts the passengers VOX squelch). Since the number of microphones...
Need help?
Do you have a question about the PMA6000 and is the answer not in the manual?
Questions and answers