...6.2.7 Set Up Clock Page
Continued from previous page.
Cal Time
HH:MM
or
Enter
Cal Time
HH:MM
or
Enter
Cal Interval
–
or
Enter
or
CAL USER CODE -----
6.2.8 Calibration User Code Page
The calibration user code is required to gain access to the Set Up Temperature Control and Calibration Pages. The access code
can be altered in the Calibration Page, if required – see Section 6.2.11.
-----
CAL USER CODE
or
Incorrect Code
Correct Code
SET UP TEMP. CONTROL
or
Ammonia
<Unit>
Flashing
Calibration Time (hour – 24 hour clock)
Set the hour of the day when the first automatic calibration is to be carried out.
Store and advance to next parameter.
Flashing
Calibration Time (minutes)
Set the minute of the hour when the first automatic calibration is to be carried out.
Store and advance to next parameter.
Calibration Interval
Days
Set the calibration interval required between automatic calibrations, starting
from the calibration date (6 hours, 12 hours or 1 to 7 days in 1 day increments).
Store.
Return to top of Set Up Clock Page.
or
Advance to Calibration User Code Page.
Calibration User Code
Set the correct user code.
Advance to next programming page.
Set Up Temperature Control Page.
or
Return to Operating Page 1.
6 PROGRAMMING...
23