Product Description - Chauvet EVE E-100Z Quick Reference Manual

Product Description

The EVE E-100Z V3 is a framing spot with built-in dimmer curves and DMX control. Framing shutters easily alter the
projected beam. Using custom gobos, an image can be projected from almost any distance with the 14° to 30° zoom
range.
The EVE E-100Z V3 is also fully compatible with the wireless D-Fi USB by Chauvet.
Product Overview
LED Display
Power In
Fuse Holder
Safety Loop
Bracket
Adjustment
Knob
Framing
Shutter x4
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing
so may cause damage to the product.
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of disuse completely
disconnect the product from power via breaker or by unplugging it.
Power Linking
For the maximum number of EVE E-100Z V3 that can be power linked at 120 V or at 230 V, see the User Manual or the
label on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
EVE E-100Z V3 QRG Rev. 3
QUICK REFERENCE GUIDE
Zoom Knob
Gobo Holder
Thumbscrew
Menu Buttons
Power Out
D-Fi USB Port
DMX IN/OUT
Focus Knob
Gel Frame Holder
Gel Frame
EN
2