Clock/Timer; Setting The Clock; Setting Timer; Activating And Deactivating Timer - Philips MC 30 System Manual

Clock/Timer

STANDBY-ON
iR
M C - 3 0 M I C R O S Y S T E M
FWD á/ë
SHUFFLE
CLOCK SIDE A/B SOURCE
TUNING
REPEAT
TIMER ON•OFF PROGRAM REW à /í REV MODE/ BAND

Setting the clock

1
In standby, press CLOCK.
➜ The clock digits for the hours flash.
2
Turn VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
3
Press CLOCK again.
➜ The clock digits for the minutes flash.
4
Turn VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
5
Press CLOCK to confirm the time.

Setting TIMER

¶ The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
¶ You can also use it to record a favorite tuner
program at a set period (REC TUN, see TAPE
RECORDER)
¶ During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In any mode, press TIMER ON•OFF for more
than 2 seconds.
2
Turn VOLUME clockwise to select sound
source.
➜ Display sequence shows CD, TUNER, TAPE
or REC TUNER.
18
pg 001-021/MC30/37-Eng
3
4
5
STOP PLAY•PAUSE
PRESET
6
VOLUME
RECORD
7
¶ In standby or during playback, press TIMER
¶ Press SLEEP on the remote
¶ To deactivate, press SLEEP on the remote
18
Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
,
shown.
Display sequence scrolls SET ON TIME and
flashes. The clock digits for the hours flash.
Turn VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
Turn VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
ON•OFF on the system once (TIMER on the
remote control).
➜ Display shows
if activated, and
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
control once or more.
➜ Display shows SLEEP and
one of the sleep time options
in sequence: 60, 45, 30,15,
SLEEP OFF, 60... if you have selected a time.
Once SLEEP is activated, SLEEP ON scrolls
across the display at repeated intervals.
control once or more until SLEEP OFF is
shown, or press STANDBY-ON on the system
or remote control.
12/8/00, 9:09 AM
or is
RECORD
APE TUNER
UX SLEEP
SC INC. SURR
3140 115 2xxx1