Table of Contents
Advertisement
Scan
Click the Scan button, the AP list will be shown as below. Select the desired root AP to
bridge in the AP list.
After selecting the desired root AP, the WDS settings page will be shown as below. If the
root AP is encrypted, you should enter the PSK password manually. Click OK to finish the
settings.
Manually
You should manually enter the parameters of the root AP. Click OK to finish the settings.
WDS:
Check the box to enable WDS feature.
SSID:
The SSID of the AP your device is going to connect to as a client.
BSSID:
The BSSID of the AP your device is going to connect to as a client.
Figure 4-6 AP List
Figure 4-7 WDS Settings
15
Advertisement
Table of Contents
