20
PowerFlex® 700S Drive
J8 (Transmit)
SynchLink
SynchLink provides high-speed synchronization and communication
between multiple PowerFlex 700S drives (or other products with SynchLink
capability).
Refer to the SynchLink Design Guide (1756-TD008) when planning and
connecting the SynchLink network.
Class 1 LED Product
ATTENTION: Hazard of permanent eye damage exists when
!
using optical transmission equipment. This product emits intense
light and invisible radiation. Do not look into module ports or
fiber optic cable connectors.
Figure 11 SynchLink Connections
Connect cables J8 (transmit) and J9 (receive) connectors on the bottom of
the Main Control Board. Push the plug into the socket until it produces an
audible click.
Important: Do not overtighten tie-wraps.
J9 (Receive)