Table of Contents
Advertisement
14
PowerFlex® 700S Drive
No.
Name
➊
Power Terminal Block
➋
SHLD Terminal
➌
AUX Terminal Block
➍
Fan Terminal Block
(Common Bus Only)
(1) Maximum/minimum sizes that the terminal block will accept - these are not recommendations.
(2) Not all terminals present on all drives.
(3) External control power:
UL Installation - 300V DC, ±10%, Non UL Installation - 270-600V DC, ±10%.
Frame 1-6, 100 W
Required
Input Fusing
Important Common Bus (DC Input) Application Notes
1. If drives without internal precharge are used (Frames 5 & 6 only), then:
a) precharge capability must be provided in the system to guard against possible damage, and
b) disconnect switches Must Not be used between the input of the drive and a common DC bus without the use of an external
precharge device.
2. If drives with internal precharge (Frames 0-6) are used with a disconnect switch to the common bus, then:
a) an auxiliary contact on the disconnect must be connected to a digital input of the drive. The corresponding input (parameter
361-366) must be set to option 30, "Precharge Enable." This provides the proper precharge interlock, guarding against possible
damage to the drive when connected to a common DC bus.the drive must have firmware version 2.002 or above (Standard &
Vector Control).
Table D Power Terminal Block Specifications
Frame
Description
1
All power terminals
2
All power terminals
3
All power terminals
All power terminals
4
All power terminals
5
R, S, T, BR1, 2, DC+, DC-, U, V
(2)
(75 HP)
and W
PE
5
R, S, T, DC+, DC-, U, V and W 70.0 mm
(2)
(100 HP)
BR1, 2,
PE
6
All power terminals
1-6
Terminating point for wiring
shields
1-4
Auxiliary Control Voltage
PS+, PS-
5-6
5-6
User Supplied Fan Voltage
0V AC, 240V AC, 120V AC
Figure 9 Power and Ground Wiring
R
S
T
PE
(L1)
(L2)
(L3)
Required Branch
Circuit Disconnect
(1)
Wire Size Range
Maximum
Minimum
2
2
4.0 mm
0.5 mm
(10 AWG)
(22 AWG)
2
2
10.0 mm
0.8 mm
(6 AWG)
(18 AWG)
2
2
25.0 mm
2.5 mm
(3 AWG)
(14 AWG)
2
2
10.0 mm
0.8 mm
(6 AWG)
(18 AWG)
2
2
35.0 mm
10 mm
(1/0 AWG)
(8 AWG)
2
2
35.0 mm
2.5 mm
(1/0 AWG)
(14 AWG)
2
2
35.0 mm
16.0 mm
(1/0 AWG)
(6 AWG)
2
2
16.0 mm
(3/0 AWG)
(4 AWG)
2
2
35.0 mm
2.5 mm
(1/0 AWG)
(14 AWG)
2
2
35.0 mm
16.0 mm
(1/0 AWG)
(6 AWG)
2
2
70.0 mm
2.5 mm
(250 MCM)
(14 AWG)
—
—
(3)
2
2
1.3 mm
0.2 mm
(16 AWG)
(24 AWG)
2
2
4.0 mm
0.5 mm
(10 AWG)
(22 AWG)
2
2
4.0 mm
0.5 mm
(10 AWG)
(22 AWG)
U
V
W
DC
DC
(T1)
(T2)
(T3)
+
–
Torque
Maximum
Recommended
1.7 N-m
0.8 N-m
(15 lb.-in.)
(7 lb.-in.)
1.7 N-m
1.4 N-m
(15 lb.-in.)
(12 lb.-in.)
3.6 N-m
1.8 N-m
(32 lb.-in.)
(16 lb.-in.)
1.7 N-m
1.4 N-m
(15 lb.-in.)
(12 lb.-in.)
4.0 N-m
4.0 N-m
(24 lb.-in.)
(24 lb.-in.)
3.6 N-m
3.6 N-m
(32 lb.-in.)
(32 lb.-in.)
5 N-m
5 N-m
(44 lb.-in.)
(44 lb.-in.)
15 N-m
15 N-m
(133 lb.-in.)
(133 lb.-in.)
3.6 N-m
3.6 N-m
(32 lb.-in.)
(32 lb.-in.)
5 N-m
5 N-m
(44 lb.-in.)
(44 lb.-in.)
6 N-m
6 N-m
(52 lb.-in.)
(52 lb.-in.)
1.6 N-m
1.6 N-m
(14 lb.-in.)
(14 lb.-in.)
—
—
0.6 N-m
0.6 N-m
(5.3 lb.-in.)
(5.3 lb.-in.)
0.6 N-m
0.6 N-m
(5.3 lb.-in.)
(5.3 lb.-in.)
BR1
BR2
Advertisement
Table of Contents
