Network Settings
The following explains the procedure for network settings in order to connect the product to your network.
Setup methods
There are three methods for set up.
Method 1: Setup using TM-T88VI Utility for Windows
This method uses the setup utility "TM-T88VI Utility" installed on your computer.
As it does not require any settings in advance to allow set up, you can easily perform set up using a computer
already connected to the network.
Method 2: Setup using EpsonNet Config
This method involves installing the network configuration tool, EpsonNet Config, on your computer for set-
ting.
As it does not require any settings in advance to allow set up, you can easily perform set up using a computer
already connected to the network.
Method 3: Setup using EpsonNet Config (Web version)
This method involves opening the Web application equipped in the printer from a Web browser to perform set-
tings.
Because you specify the printer's IP address to open it, you need to set your computer to the same network seg-
ment as the printer.
With EpsonNet Config (Web version), you can set more items than with EpsonNet Config.
Flow of Setup
Method 1
Printing the status sheet (check settings) (See
Setup using TM-T88VI Utility for
Windows
Finish
Method 2
"Printing a Status Sheet" on page
Setup using EpsonNet
Config
Finish
Chapter 3 Advanced Usage
Method 3
79.)
Change network settings
on setting computer
Use EpsonNet Config
(Web version) to perform settings
Finish
3
65