Interfaces - Epson TM-T88VI-iHUB Reference Manual

Interfaces

All interfaces are located on the lower rear of the printer.
2
1 Drawer kick
connector
2 Ethernet port
3 Serial port
4 USB port
(Type A)
5 USB port with
charging func-
tion
6 Power supply
connector
7 USB port
(Type B)
18
Do not insert a Type-B USB connector into the Ethernet port or the drawer kick connector. If it is
inserted, the port, printer, and the system may malfunction.
1
3 4 5 6
Connects the cash drawer or the optional external buzzer.
See "Connecting the Cash Drawer" on page
page 42.
Connects the 10BASE-T/100BASE-TX ethernet cable.
Use only for connecting external devices.
Use only for connecting external devices.
CAUTION:
It may be hard to disconnect some types of USB cable. Do not forcibly pull the cable, or the USB
port and USB cable may be damaged. Contact your dealer if you encounter the trouble.
Connects a USB cable for connecting to an external USB device, or for charging a connected smart
device or USB device. By using the setting utilities, you can configure whether to use the port for
connecting a device or charging a device.
CAUTION:
 It may be hard to disconnect some types of USB cable. Do not forcibly pull the cable, or the USB
port and USB cable may be damaged. Contact your dealer if you encounter the trouble.
 Make sure you use the genuine cable for the tablet, smartphone, or USB device you are using.
 Depending on how the device is being used, it may not charge to 100%.
 It may take a few seconds before charging starts as the device searches for the most suitable
amperage.
 Charging may not be performed depending on the device's charging specifications.
 Charging stops if it exceeds the rating for the USB port.
Connect the AC adapter.
See "Connecting the AC adapter" on page
Connects the USB cable for connecting to a computer.
See "Connecting the Printer to the Host" on page
7
40, and "Connecting the Optional External Buzzer" on
34.
35.