Table of Contents
Advertisement
13. To save the results in the save menu
press the
was successful when the number in
front of the symbol
reach the store menu please press ( )
until the
appears.
14. To name the saved results press the
button.
15. Empty the humimeter BM1 and ensure
that no material rests are accumulated in
the measuring chamber.
Measuring process of wooden pellets:
Measure wooden pellets with the calibration curve "5,00kg pellets".
For this measurement the bucket not has to be full of pellets, you
must fill in 5,00 kilograms of wooden pellets every time.
Measuring process of dry wood-shavings:
Is the 13 litre bucket not big enough for 1,00 kilogram of shavings,
the measuring device has to be filled separately (e.g. 2 x 0,50kg).
During the filling process the measuring material has to be slightly
and constantly compressed in the measuring chamber in order to
provide enough place for 1,00kg of shavings. After finishing the
filling process, all of the measuring material has to be 5cm below
the back case edge.
List of calibration curves
Pressing the
window for at least 3 seconds and a list with
all available sorts will appear. Select your
sort by pressing
the
key. The measurement will continue
automatically.
page 4
(
button). The storage
increased. To
or
key in the measuring
or
and confirm it with
Version 2.5_en
Advertisement
Table of Contents
