Table of Contents
Advertisement
Measuring procedure
1. Switch on the scale
2. Place the scale on an even and sturdy
work surface. Place the humimeter in the
centre of the scale. Zero the scale to
show 0.000kg.
3. Fill the supplied 13 litre bucket with
samples taken from varying locations in
sample storage.
4. Check that the measuring chamber is
completely empty. It is important that no
material is left in the measuring chamber
when you turn on the device.
5. Switch on the humimeter by pressing the
power button ( ) for 3 seconds.
6. As the next step, please do the self
calibration. The word "Reinitialize?" will
show up on your display. Accept by
pressing the
7. The self calibration is finished when the
display shows the measuring window.
page 2
button.
Version 2.5_en
Advertisement
Table of Contents
