At Commands Summary - Teleorigin RB800 User Manual

8.10 AT commands summary

As a conclusion table below shows most common and useful AT commands.
For more AT commands refer to [1].
Action
Echo enable ATE1
Echo disable ATE0
Voice call ATD<phoneNo>;
Remember of ';'
Hung up call ATH
Receiving call ATA
Communication
loss
Enter PIN code AT+CPIN=[<puk>
or <pin>],
[<newpin>]
Check PIN code AT+CPIN?
status
*
Refer to [1].
Syntax
OK
OK
OK
NO CARRIER/BUSY/NO
ANSWER
+CME ERROR: <err>
OPERATION NOT
ALLOWED
UNKNOWN CALLING
ERROR
NO CARRIER
OK
NO CARRIER
OK
+CME ERROR: <err>
+CPIN: <code>
OK
+CME ERROR: <err>
Response
Typed text is seen.
Typed text is not seen.
Call initiated.
Connection failure.
General error*
Security reason (such as SIM
card not inserted)
Unknown reason
Connection is hanged up.
Call is answered.
Set PIN or PUK or new PIN
code.*
General error*
Returns status of PIN.
e.g. READY or SIM PIN
General error*
Comments
23