Missed Call Notification; Calling Emergency Numbers; In-Call Options; End-Of-Call Options - Sanyo SCP-2500 Operating Manual

Hide thumbs Also See for SCP-2500:
Table of Contents

Advertisement

Missed Call Notification

When an incoming call is not answered, the Missed Call log is displayed on your screen.
To display the Missed Call entry:
Select MENU/OK > Missed Alerts.
To call the entry:
Highlight the entry you want to call and press TALK .

Calling Emergency Numbers

You can place calls to 911 (dial 9 1 1 and press TALK), even if your phone is locked or your
account is restricted. Once the dial is made, you will enter Emergency mode. The phone tries to
dial to 911 automatically until the dial will be connected. While you are in the Emergency mode,
all phone calls can be received.
To exit from the Emergency mode, follow these instructions:
1. Press END/ .
2. Press Options > Exit Emergency.

In-Call Options

During a call, your phone displays menu options by pressing Options (right softkey). To select
an option, highlight it and press MENU/OK.
Flash to answer an incoming Call Waiting call or connect a third party during Three-Way
Calling.
Mute or Unmute to mute or reactivate your phone's microphone.
Speaker On or Speaker Off to route the phone's audio through the speaker. You can
adjust the speakerphone volume using the Side Up/Down key.
Transfer Audio to switch the call to your desired device(if applicable).
Three- Way Call to call a third party.
Call History to access the Cal History menu. (See "Managing Call History" on page 29.)
Contacts to access the Contacts menu. (See "Using the Contacts Directory" on page 31.)
Messaging to access the Messaging menu.
Settings to access the Settings menu. (See "Controlling Your Phone's Settings" on page
17.)
Tools to access the Tools menu.
Note: The Flash menu appears only for Call Waiting and Three-Way Calling. The Mute menu
does not appear during a 911 call. The Three-Way Call Menu does not appear in Roaming
areas.

End-of-Call Options

To display the following options, press Options (right softkey) within 10 seconds after
disconnecting a call.
To select an option, highlight it and press MENU/OK.
12

Advertisement

Table of Contents
loading

Table of Contents