Table of Contents
Advertisement
E. ADJUSTING THE THROTTLE CABLE FREE PLAY
TIP:
Prior to adjusting the throttle cable free play, the engine
idling speed should be adjusted.
1. Check:
•
Throttle cable free play "a"
Out of specification ! Adjust.
a. Slide back the rubber cover "1"
b. Loosen the locknut "2".
c. Turn the adjusting nut "3" in direction "a" or "b" until
the specified carburetor cable free play is obtained.
d. Tighten the locknut
e. Slide the rubber cover to its original position.
Direction "a"
Throttle cable free play is increased.
Direction "b"
Throttle cable free play is decreased.
WARNING
After adjusting the throttle cable free play, start the
engine and turn the handlebar to the right or left to
ensure that this does not cause the engine idling
speed to change.
F. ADJUSTING THE REAR BRAKE FREE PLAY
1. Measure:
brake pedal free play (a)
Out of specification → Adjust.
Free Play: 15 ~ 20 mm
2. Adjust:
•
Brake pedal free play
a. Turn the adjusting nut "1" in direction "a" or "b"
until the specified brake pedal free play is obtained.
Direction "a"
Brake pedal free play is increased.
Direction "b"
Brake pedal free play is decreased.
NOTICE
After adjusting the brake pedal free play, make sure
there is no brake drag.
3. Adjust:
•
Rear brake light switch
31
Hide quick links:
Advertisement
Table of Contents
