Canon Laser Shot LBP5200 Getting Started Manual page 17

•
Keep pulling on the tape until it is fully removed from the cartridge. If any
sealing tape is left inside the toner cartridge, you may experience printing
problems.
•
Dispose of the sealing tape according to local regulations.
9
Hold the grip on the toner cartridge, and install it in the
printer.
Align the triangular mark on the toner cartridge with the triangular mark on the
printer when you insert the toner cartridge.
When the toner cartridge is installed properly, the labels on the toner cartridge and
the toner cartridge holder will line up as shown in the figure.
10
Close the top cover.
Hold the grip on the top cover and close it gently.
The toner cartridge holder rotates to the position of the next color to install. Do not
open the top cover of the printer while the toner cartridge holder is rotating.
11
Open the top cover after the operating sound of the printer
stops (approx. 1 second).
IMPORTANT
Even when you are using new toner cartridges, toner may adhere to the
toner cartridges and the areas around the toner cartridges when you open
and close the top cover. This has no effect on printer operation, printing
quality, or toner consumption, and the printer can be used as it is.
Step
3
17