7
Remove the protective cover.
Grasp the protective cover and remove it as shown in the figure.
Step
3
IMPORTANT
•
Do not hold or touch the developing roller. Doing so will degrade the
printing quality. Do not jolt the toner cartridge memory or bring it near a
magnetic field. Doing so may damage the toner cartridge.
Toner Cartridge
Memory
•
Do not throw the protective bag away. You will need this bag when you
remove the toner cartridge for printer maintenance, etc.
16
Protective
Cover
Developer Roller
8
Place the toner cartridge on a flat surface, then slowly pull
out the sealing tape (approx. 45 cm in length) while
supporting the toner cartridge.
To pull out the sealing tape, grasp the tab at the end of it and pull it straight out in
the direction of the arrow.
CAUTION
If you pull on the sealing tape with excessive force or stop pulling
midway, toner may spray from the tape. If toner gets into your eyes or
mouth, wash it out immediately with cold water and consult a doctor.
IMPORTANT
•
Do not bend the tape or pull it up or down. If you do, the sealing tape may
break in the middle, and you won't be able to fully remove it.