Canon Laser Shot LBP5200 Getting Started Manual page 37

4
Adjust the positions of both of the side paper guides to
match the paper size.
When adjusting the side paper guides, hold both of the guides at the same time.
Adjust this component to match
the loaded paper size.
IMPORTANT
If you are using B5 size paper (182 mm x 257 mm), set the paper guides to
the positions shown in the diagram ([B5-JIS] position). Do not use the [B5-
ISO] position.
[B5-ISO] Position
[B5-JIS] Position
5
Load the paper stack so that the far end of the pages
touches the paper guide.
Paper Limit
Mark
CAUTION
When loading paper, take care not to cut your hands with the edges
of the paper.
IMPORTANT
•
Always check that the paper guide matches the size of the paper you are
loading. If the paper guide does not match the paper size that you load,
paper feeding errors will occur.
•
The number of sheets of plain paper that can be loaded in the paper
cassette is approximately 250 (for 64 g/m
that you do not load paper beyond the paper limit mark on the paper guide.
Loading paper past the paper limit mark can cause paper feed errors.
2
paper). Make absolutely sure
Step
37
6