Overview Of The Camera; Installation Of Hardware - HomeSecure HS-IP-03 User Manual

2.2 Overview of the Camera

Please familiarize yourself with the hardware setup of the camera before you start installing.
Sensor
IR LED's
Power indicator
Built-in microphone
Ethernet Port

2.3 Installation of Hardware

Attach the wifi antenna by screwing it on and attach the power supply. Then connect the IP camera to
your router with the network cable (NOTE: You will connect the camera to the wireless network later
in the process in [4.2.3 Wifi] please keep the cable connected until that procedure is done).
When the camera powers up, the power indicator will light green and the camera
calibrates position by panning and tilting all the way around.
Do not install the camera in its final position until you have finished the complete
setup.
Copyright © 2015 HomeSecure
HomeSecure HS-IP-03 manual: 22-01-2015
Reset button
Antenna
TF card slot
Power input
7