P2P - HomeSecure HS-IP-03 User Manual

Enable/disable Wifi connection.
Pop up is shown when you choose
network.
Click [Save] to save the changes or [Test]
to test the connection first.
The IP camera is allocated new MAC and IP addresses when you switch to wifi.

4.2.4 P2P

Enable/disable P2P function. The P2P function makes it possible for you to connect directly to the
camera from the smartphone app for Android and iPhone.
Enable/disable P2P.
Click [Refresh] to update info.
P2P requires UPnP to be activated on your router. Please refer to your router's
manual.
Be aware that UPnP opens up the port for all devices with UPnP enabled to access
the internet and thereby might create a potential security risk.
Ask an experienced IT specialist if you have no experience with port
forwarding/NAT on your router.
Choose your wireless network (SSID) on
the list.
Input network key for the network.
Click [Refresh] to update info.
Copyright © 2015 HomeSecure
HomeSecure HS-IP-03 manual: 22-01-2015
UID (Unit ID), is used in the app to
connect directly to the camera.
20